|Version 2 (modified by laforge, 4 years ago)|
PCAP and protocol analysis
pcap is a data format for captured packets of communication protocols. It is used by a library called libpcap, which in turn is used by popular network protocol analyzer projects such as tcpdump and wireshark.
In the Ethernet/Internet? world, you typically capture packets from your ethernet card using RAW sockets and promiscuous mode.
With GSM protocols such as A-bis, it is obviously not that simple - since they are at least traditionally not transported over IP.
Recording and viewing A-bis communication
Method 1: bsc_hack PCAP option (obsolete)
The bsc_hack application inside openbsc provides a command line option to automatically create a PCAP file. The resulting dump is only a subset of what is actually transmitted over the wire. Currently only Link Access Protol D-Channel (LAPD) messages are logged, the actual LAPD header is spoofed and only the TEI and SAPI information is invalid. This is mostly due mISDN not providing us with a LAPD header/frame and the encapsulation we use for wiretap/pcap. In the future there might be a dedicated encapsulation type for the complete mISDN traffic.
To write the protocol dump simply invoke bsc_hack:
./bsc_hack -p networking.pcap
Method 2: Using misdn_log
This is the preferred method in case you are using the mISDN input driver for OpenBSC, e.g. with a BS-11 BTS.
In order to obtain a A-bis capture and save it in a pcap file, please use the misdn_log tool (part of mISDNuser) the following way:
misdn_log -c0 -w networking.pcap
Please make sure to first start bsc_hack and only then start misdn_log
Method 3: Using tcpdump
If you're using an A-bis over IP based BTS such as the [nanoBTS], then you can use a regular tool like tcpdump to create a pcap file
tcpdump -ni eth0 -s 0 -w networking.pcap
Wireshark already provides dissectors for the various protocols we use (LAPD, RSL, GSM-A, GSM-SMS...). The LAPD protocol dissector needs some minor configuration though. Go to Edit -> Preferences -> Protocols -> LAPD and check the checkbox saying "Use GSM Sapi Values". Afterwards wireshark will be able to display a lot of the A-bis protocol. There are some glitches in the protocol analysis, some missing features and dissection of OML is completely missing.
Also, only the most recent wireshark development versions contain a dissector for the ip.access A-bis over IP protocol. We recommend you to build wireshark from the latest source code, or alternatively apply the patch that is found in the wireshark directory of our git repository.
A-bis OML dissector
To add a dissector for the GSM 12.21 A-bis Organization and Maintenance Layer (OML), you can use the abis_oml.patch file from the wireshark directory of our git repository. This will be submitted for inclusion into wireshark soon.
Dumps for you
Here are some dumps that might be useful. Make sure that you only provide data from your own network and equipment (no IMSI/IMEI you do not know...)
(4.8 KB) - added by anonymous
4 years ago.
Setup + Location Updating Request + Accept + SMS
(4.4 KB) - added by anonymous
4 years ago.
Setup + Location Updating Request + Reject
(7.9 KB) - added by laforge
2 years ago.
pcap file containing a MO and MT call leg on a BS-11