Timeline


and

02/21/09:

22:02 TektronixK1103 edited by holger
grammar fixes and copyright note (diff)
22:00 TektronixK1103 created by holger
Filled the page
21:45 WikiStart edited by holger
Added the K1103 analyzer to titlepage (diff)
21:45 BS11/Getting_Started edited by laforge
(diff)
17:40 Ticket #25 (Call HOLD / RETRIEVE support) created by laforge
We don't do HOLD/RETRIEVE of calls so far.
17:40 Ticket #24 (USSD support) created by laforge
USSD is defined within the GSM standard in the documents GSM 02.90 (USSD …
17:39 Ticket #23 (IMSI ATTACH/DETACH procedure) created by laforge
We should support IMSI ATTACH and DETACH
17:39 Ticket #22 (Add DTX/DRX support) created by laforge
DTX/DRX support needs to be implemented and tested. It should be a …
17:38 Ticket #21 (we don't see CHANnel ReQireD from motorola EZX phones at call setup) created by laforge
This is very weird. The EZX phones like E6, A1200, etc. can do a …
17:36 Ticket #20 (phone calls between AMR-capable handset and EFR-only handset) created by laforge
Apparently there is still something broken in the negotiation of the …
17:31 Ticket #9 (HowTo for step-by-step setup of BS-11 and OpenBSC) closed by laforge
fixed: this has been added to the wiki as BS11_Getting_Started?
17:30 Ticket #3 (Finish TRAU frame demultiplex/remultiplex) closed by laforge
fixed: has been fixed now, the code dynamically maps TRAU channels onto each …
17:09 BS11/Getting_Started created by laforge
bs11 getting started page
16:49 WikiStart edited by laforge
(diff)
16:48 BS11/Configuration edited by laforge
more precise and current LMT parameters (diff)
16:46 BS11/Configuration edited by laforge
add link to (diff)
16:37 bs11_connector_covered.jpg attached to BS11/Configuration by laforge
E1 + serial connection board, still covered
16:36 bs11_power_lmt_cabling.jpg attached to BS11/Configuration by laforge
Power and LMT cable attached to BS-11
16:36 bs11_lmt_cable.jpg attached to BS11/Package_List by laforge
The LMT RS232 cable
16:35 bs11_antenna.jpg attached to BS11/Package_List by laforge
the BS-11 antenna before it is mounted
16:34 hfc_e1_evalbd_jumper.jpg attached to HFC-E1 by laforge
HFC-E1 Evaluation Board jumper settings
16:34 hfc_e1_evalboard.jpg attached to HFC-E1 by laforge
HFC-E1 Evaluation Board
15:02 HFC-E1 edited by laforge
nt mode config, not TE mode config :) (diff)

02/19/09:

04:40 WikiStart edited by laforge
structure change (diff)
04:38 osmo-nitb edited by laforge
more information about usage (diff)
04:27 osmo-nitb edited by laforge
(diff)
04:05 bs11_config edited by laforge
add information about new commands (diff)

02/16/09:

23:14 Ticket #19 (ip.access nanoBTS support) closed by laforge
fixed: done as of now. paging/location_update/sms/call all works. just no voice …
23:14 Ticket #19 (ip.access nanoBTS support) created by laforge
make all things work with nanoBTS that work with BS-11 already.
23:12 Ticket #2 (Fix / finish the paging code) closed by laforge
fixed: seems to work quite reliably now, thanks to zecke
21:12 nanoBTS edited by laforge
(diff)
Note: See TracTimeline for information about the timeline view.